Eurorack Pedal Adapter

The Eurorack Pedal Adapter is designed to interface between Modular Eurorack Systems and effects pedals. 

Eurorack operates at a nominal level of 10 volts, while effects pedals function best at 1-2 volts max. The Pedal Adapter has a 6.35mm input which reduces signal by a factor of 15:1 and feeds it to the 1/4" Send jack which is connected to your effects pedal. After processing, signal is brought back in via a 1/4" Return jack. An internal amplifier increases the voltage back to Eurorack level and signal is connected to the 6.35mm Out Jack and connected back in your modular synth signal chain.

The RCA 40mm Bakelite knob controls the Output Trim level of the boosting amplifier - it is a TRIM which means it will not fully attenuate the signal, event at its minimum.

The Adapter uses a charge pump that runs internally at +16v / -16b to insure that signal can cleanly be boosted without running out of headroom. Output levels of 26v peak to peak are no problem.

125B Polished Aluminum enclosure. An external 9v DC 2.1mm center negative is required not included.) Use of any other power supply will result in damage to the pedal.

Recommended power supply is the Truetone One Spot.